The composition of the probe includes: Acoustic lens, matching layer, array element, backing, protective layer and casing.
Working principle of ultrasonic probe:
The ultrasonic diagnostic instrument produces incident ultrasonic (emission wave) and receives reflected ultrasonic wave (echo) through the probe, it is an important part of diagnostic equipment. The task of ultrasonic probe is to transform the electrical signal into ultrasonic signal or to transform the ultrasonic signal into electrical signal. At present, the probe can transmit and receive ultrasound, conduct electroacoustic and signal conversion, transform the electrical signal sent by the host into a high-frequency oscillation ultrasonic signal, and transform the ultrasonic signal reflected from the tissue organs into an electrical signal and be displayed on the display of the host. The ultrasound probe is made from this working principle.
3. The warranty period for endoscopic repair is six months for some soft lenses, and three months for other Urethral soft mirror, hard lenses, camera systems and instruments
Notes for the daily use of ultrasonic transducer:
Ultrasonic probe is a key component for an ultrasound system. Its most fundamental work is to realize the mutual conversion between electric energy and sound energy, that is, both can convert electric energy into sound energy, but also can convert sound energy into electric energy; A probe may consist of dozens or thousands of array element (for example, the PHILIPS X6-1 probe has 9212 array elements ). Each array consists of from 1 to 3 cells. Thus, the probe that we hold in our hands all day long, is a very precise, very delicate thing! Please treat it gently.
1. Handle with care, do not bump.
2. The wire is not fold Don't tangle
3. Freeze if you don't need it: freezing state, the crystal unit no longer vibrates, and the probe stops working. This habit can delay the aging of the crystal unit and prolong the life of the probe. Freeze the probe before replacing it.
4. Timely cleaning of the coupling agent: when using no probe, wipe off the above coupling agent, to prevent leakage, corrosion of the matrix and welding points.
5. Disinfection should be careful: disinfectants, cleaning agents and other chemicals will make sound lenses and cable rubber skin aging and brittle.
6. Avoid using it in places with strong electromagnetic interference.
Our contact number: +86 13027992113
Our email: 3512673782@qq.com
Our website: https://www.genosound.com/
Post time: Feb-15-2023
